Alfa 159 Magneti Marelli Navi boot loop

sicherung für Radio mal ziehen oder Batterie abklemmen.

Würde vielleicht noch ein Software Update versuchen.

Wenn es denn eins gibt dafür.

Hello Tobi159

I did encountered a similar problem after software update and i did manage to repair my navi

I spend a lot of time thinking about it and I did found a solution !

I did prepare recovery disc which You need to burn ( i did it on 16x speed on a verbatim CD with Pioneer CD burner )

The link to the IMAGE

https://mega.nz/#!3mxlmRjB!5NY…roM_0U_wk5NNSRf7efzqWj23Q

Ten you need to remove radio and find on it in the bottom a little hole with switch in it.

Turn on the ignition and insert burned CD to the drive then

press the ESC button till radio resets then press the hidden button till radio resets again then JUST WAIT and listen if the CD drive tries to read the disc

Yu will know that the radio is in RECOVERY because the fan will work normal.

Hi AVErsiv. Nice job!

One little question: Which software version did you use as base for this recovery flash?

Zitat von dksp

Hi AVErsiv. Nice job!:Like:

One little question: Which software version did you use as a base for this recovery flash?

Hello

I used 1.19.2

Thanks. This is the latest, right?

It looks like it,

Ifound 1.22.x but there is no specific description that it matches the magnetimarelli 939 RADIONAV

If and when i will find and test it i will write the results

Iwas occupied installing AUX-IN to it so software updating was delayed.